|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
| Rotary Tooling |
Home >
Rotary Tooling > HYDRAULIC CHUCK
|
 |
|
|
|
|
DUAL CONTACT HYDRAULIC CHUCK (For MOULD) HSK
|
|
|
|
|
|
|
|
 DUAL CONTACT HYDRAULIC CHUCK (For MOULD) HSK |
| TAPER No. |
MODEL No. |
d1 |
D1 |
D2 |
L |
L1 |
L2 |
G |
EDP No. |
| 63A | HSK63A-HMC1/4-5.70 | 0.250 | 0.787 | 1.969 | 5.700 | 3.543 | 1.063 | M5x0.8mm | WQ020HMC |
| HSK63A-HMC5/16-5.70 | 0.313 | 0.866 | 1.969 | 5.700 | 3.543 | 1.063 | M6x1.0mm | WQ022HMC |
| HSK63A-HMC3/8-5.70 | 0.375 | 0.945 | 1.969 | 5.700 | 3.543 | 1.260 | M8x1.0mm | WQ024HMC |
| HSK63A-HMC1/2-5.70 | 0.500 | 0.984 | 1.969 | 5.700 | 3.543 | 1.457 | M10x1.0mm | WQ026HMC |
| HSK63A-HMC5/8-5.70 | 0.625 | 1.260 | 1.969 | 5.700 | 3.543 | 1.654 | M12x1.0mm | WQ028HMC |
| HSK63A-HMC3/4-5.70 | 0.750 | 1.417 | 1.969 | 5.700 | 3.543 | 1.654 | M16x1.0mm | WQ030HMC |
| 100A | HSK100A-HMC1/4-5.70 | 0.250 | 0.787 | 1.969 | 5.700 | 3.543 | 1.063 | M5x0.8mm | WR100HMC |
| HSK100A-HMC5/16-5.70 | 0.313 | 0.866 | 1.969 | 5.700 | 3.543 | 1.063 | M6x1.0mm | WR102HMC |
| HSK100A-HMC3/8-5.70 | 0.375 | 0.945 | 1.969 | 5.700 | 3.543 | 1.260 | M8x1.0mm | WR104HMC |
| HSK100A-HMC1/2-5.70 | 0.500 | 0.984 | 1.969 | 5.700 | 3.543 | 1.457 | M10x1.0mm | WR106HMC |
| HSK100A-HMC5/8-5.70 | 0.625 | 1.260 | 1.969 | 5.700 | 3.543 | 1.654 | M12x1.0mm | WR108HMC |
| HSK100A-HMC3/4-5.70 | 0.750 | 1.417 | 1.969 | 5.700 | 3.543 | 1.654 | M16x1.0mm | WR110HMC |
| | | | | | | | Unit : mm | |
| TAPER No. | MODEL No. | d1 | D1 | D2 | L | L1 | L2 | G | EDP No. |
| 63A | HSK63A-HMC6-145 | 6 | 20 | 50 | 145 | 90 | 27 | M5x0.8mm | WQ100HMC |
| HSK63A-HMC8-145 | 8 | 22 | 50 | 145 | 90 | 27 | M6x1.0mm | WQ102HMC |
| HSK63A-HMC10-145 | 10 | 24 | 50 | 145 | 90 | 32 | M8x1.0mm | WQ104HMC |
| HSK63A-HMC12-145 | 12 | 25 | 50 | 145 | 90 | 37 | M10x1.0mm | WQ106HMC |
| HSK63A-HMC16-145 | 16 | 32 | 50 | 145 | 90 | 42 | M12x1.0mm | WQ108HMC |
| HSK63A-HMC20-145 | 20 | 36 | 50 | 145 | 90 | 42 | M16x1.0mm | WQ110HMC |
| 100A | HSK100A-HMC6-150 | 6 | 20 | 50 | 150 | 90 | 27 | M5x0.8mm | WR200HMC |
| HSK100A-HMC8-150 | 8 | 22 | 50 | 150 | 90 | 27 | M6x1.0mm | WR202HMC |
| HSK100A-HMC10-150 | 10 | 24 | 50 | 150 | 90 | 32 | M8x1.0mm | WR204HMC |
| HSK100A-HMC12-150 | 12 | 25 | 50 | 150 | 90 | 37 | M10x1.0mm | WR206HMC |
| HSK100A-HMC16-150 | 16 | 32 | 50 | 150 | 90 | 42 | M12x1.0mm | WR208HMC |
| HSK100A-HMC20-150 | 20 | 36 | 50 | 150 | 90 | 42 | M16x1.0mm | WR210HMC |
|
|
 |
|
